PDQ LaserWash 360 PlusTouchless in-bay car wash
No brushes — gentle on the paint →A reliable investment in the future of the car wash business. Supply, installation, staff training and service — from one partner.
~10years with PDQ
Rigaspare parts warehouse
LV · EN · RUtechnical support
~10years with PDQ
Rigaspare parts warehouse
LV · EN · RUtechnical support
Touchless vs brushes
No brushes.A different level of car wash.
PDQ is the world-leading manufacturer of touchless car wash equipment. More than 10,000 LaserWash machines shipped worldwide.
Brush car wash
- Brushes rub the paint — grit from previous cars stays in the bristles
- Risk of swirl marks; mirrors, antennas and spoilers can get caught
- Brushes thump and roar against the car — not a relaxed ride
LaserWash 360 Plus
- Only water and chemistry touch the car body
- If the arch meets an obstacle — a mirror or a tow bar — it backs off and works around it
- Calm and comfortable: LED signs and voice prompts guide the driver
The choice of those who care for their car
- Owners of new and premium cars
- Business leaders who value their time
- Corporate and executive fleets
- Everyone who protects their paintwork
LaserWash is chosen by those who value comfort and quality and care about their reputation.
Is LaserWash 360 Plus cheaper than a brush car wash?
No. It costs more.
Why?
Because it's better.
- Nothing rubs the paint
- Follows the contour of every car
- Customers who come back
Quality is never cheap.
Drive Clean.

Why operators choose 360 Plus
A touchless in-bay automatic: the vehicle stands still, the bridge moves around it. Only water and chemistry touch the car body.
Source: PDQ / OPW Vehicle Wash Solutions.
Open bay, clear floor
All equipment hangs under the ceiling and nothing stands on the floor — an easy, confident drive-in for any driver.
More revenue per bay
Front bug prep, dedicated super sealant, FlashDry and faster wash cycles add services and throughput.
Built for a wet bay
Aircraft-grade anodised aluminium bridge and rails, stainless steel pump station, welded manifolds with fewer leak points.
Lower cost of ownership
Less water, chemistry and electricity per car. Fewer sensors, swivels and valves; common electronic parts.

10 car washes in Riga and Ādaži already run on 360 Plus
The network of our partner AUTO RINGS — 11 wash bays, most of them open 24/7. See a machine at work before you invest.
Demo site: Senču iela 2F, Rīga · daily 07:00–22:30
What happens inside the bay
Smart 360 is the control logic of the machine: it measures the vehicle, times the chemistry and steers the arch.

- Smart 360 Cleaning
Rounded arch corners, smart chemical timing and a tilting arch for better coverage. Services and speeds in any combination; favourite and seasonal packages are stored.
- Smart 360 Arch Control
Three-axis motion: the arch turns 360° around the vehicle, corner time 1.5 s instead of 4 s. Obstacles such as trailer hitches or mirrors are located and remembered, and the arch avoids them on later passes. If it cannot get round, it fully retracts, rinses the solution off with the overhead rinse arch and asks the driver to exit; once the bay is clear, the machine resets itself.
- Arch for modern bodies
A longer top manifold cleans wider vehicles; a new side arch focuses on hard-to-reach areas such as under spoilers over the rear window.
- FlashDry · SwingAir
Rinse and dry in one operation: over 80% of water removed in a single 10-second pass, with no added time. SwingAir oscillates the two centre producers to sweep water off the top while the outer ones push it down the sides — drier cars with less energy.
- Express mode
In peak hours packages can be shortened to about two minutes; at quiet times — the ultimate cleaning mode.
- Driver guidance
Virtual treadle: ultrasonic sensors measure the car, LED signs and audio messages guide the driver. Precision loading makes the bay effectively about 30 cm longer, and the floor stays open.
- Smart 360 Networking
Standard web interface, no special software: program wash packages, monitor sales and real-time wash data. The machine sends alerts to your computer, tablet or smartphone — fewer site visits.
- Frost protection
Weep / freeze protection keeps the water lines from freezing in cold weather — important for Baltic winters.
- Built for the wash bay
Under the Ultimate cover package, air valves sit in a separate enclosure and fluid valves are removed from the bridge. Trolley rollers run inside the anodised profile, protected from the wash environment. Control by three nodes — pump, bay and bridge.

LaserGlow Arch · BayGlow
LaserGlow Arch — an illuminated wash arch that speeds up loading and unloading. LED colours guide the driver in (green · yellow · red), can match your brand, holidays or each wash package, and keep the bay glowing day and night — visible from the street. BayGlow adds a light show across the whole bay.
Already run a LaserWash 360? LaserGlow bridge lighting is available as a retrofit kit.
Photo: PDQWhat comes with the machine — and what can be added
Base unit as listed in the PDQ brochure. The final scope for your site — in the quote.
Machine and control
- LaserWash 360 Plus
- Corrosion-resistant bridge & trolley
- Smart 360 Technology: Smart Networking, Smart Dwell, Smart Arch Control, Smart Drying System, Smart Cleaning System
- Automatic Obstacle Guidance
- Virtual Treadle
- In-Bay Sign
- Electrical control panels
Pump station, arch and mounting
- CAT 3535 pump
- Pump station water tank
- Fully loaded E-Chain & bulkhead manifolds
- Advanced Arch Package
- SST wall mounts
- Aluminium rails
Item names as used by PDQ.
Drying
- 4-nozzle integrated dryer
- MaxAir stand-alone dryer
- DryLite (LED) stand-alone dryer
- SwingAir synchronized motion drying
Appearance and chemistry
- 3X Color Foam
- OverGlow Hi-Gloss application
- Dedicated Super Sealant manifold
- Dedicated Front Bug Prep manifold
- Rust inhibitor
- Wheel cleaner
- DuraShiner tire shiner
- Spot-free rinse application
High pressure and rinse
- High-pressure undercarriage
- High-volume rinse arch
- High-speed rinse (HP rinse pass)
- Electric HP Gatling guns
- HP side combo blasters
Light and signs
- NEW LaserGlow Arch
- LaserGlow Bridge illumination
- LaserGlow Projection illumination
- BayGlow wash bay illumination
- LED entrance sign
- LED service confirmation sign
- LED advanced overhead instructional sign
Water and pumps
- Water heater
- Single / dual pressure-fed inlet
- Water Saver Package
- Booster pump for low-pressure sites
- RO systems
- Water reclaim systems
- Storage tanks
Installation and entry
- Free-standing frame
- In-bay pump station covers
- Wash activation entry terminals
- Precision loading eyes
Exact configuration and prices — in the quote.
Will it fit your building?
Inside dimensions of the wash bay per PDQ, in metres.
Side view — wall-mounted rails.
Front view — width with wall mounting (min–max) and clearance from floor to arch.
| Parameter | Wall-mounted | On frame (floor) |
|---|---|---|
| Minimum bay length | 8.64 m | 9.02 m |
| Minimum bay height | 3.20 m | 3.28 m |
| Bay width * | 4.11 – 5.49 mmin – max | 4.11 m4.28 m with integrated dryer |
| Clearance from floor to arch | 2.13 m | |
| Recommended bay (PDQ), W × H × L | 4.57 × 3.35 × 8.79 m | Length from 9.02 m — checked on site |
* Without off-board dryers. Rails can be cut to length for shorter bays; precision loading lets longer vehicles fit, making the bay effectively ~30 cm longer. Where walls are not strong enough, the machine stands on a free-standing frame. We check every building individually.
What we check on your site
Water supplyPressure and flow; booster pump for low-pressure sites, single or dual pressure-fed inlet.
Electrical supplyConnection capacity and location of the control panels.
Drainage and water reuseDrains, separator, storage tanks and water reclaim system.
Heating and frostBay and pump room temperature, water heater, doors and freeze protection — our partner's network in Riga runs all year.
Pump station roomSpace for the pump station, chemistry, water treatment (softener, RO).
Entry and paymentPlace for the wash activation terminal, signs and traffic flow.
Exact values for your configuration and options — in the quote.
Connections — PDQ data
PDQ data from the LaserWash 360 Plus brochure, 400 V row. Exact values for your configuration and options — in the quote.
Send us your site planExisting car washes in Latvia
All sites of our partner AUTO RINGS run on PDQ LaserWash 360 Plus. Come and see a real wash before you invest.
Schematic map, not to scale. Dashed — opening soon.
From site plan to the first wash — and after
One contact for the whole project.
- Site assessmentBay dimensions, utilities and traffic flow.
- Project and layoutEquipment configuration and bay layout for your building.
- SupplyEquipment and options delivered from PDQ.
- Installation and start-upInstallation, commissioning and wash program setup.
- Staff trainingDaily checks, settings, chemistry and first-level troubleshooting.
- ServiceMaintenance, repairs and spare parts.
Spare parts warehouse in Riga
Main spare parts in stock — no waiting for delivery from the US.
Technical support in LV · EN · RU
Our technicians speak Latvian, English and Russian.
Almost 10 years with PDQ
Professional service. PDQ-certified technicians.
Frequently asked
Machine and bay
How is LaserWash different from a brush car wash?
There are no brushes at all: only high-pressure water and chemistry touch the car body, while the arch travels around the vehicle. No brush swirl marks and no brushes to replace. That is why drivers who care for their cars choose it.
What is the clearance under the arch?
2.13 m from the floor to the arch (PDQ data). We confirm limits for your vehicles and bay during the site check.
Can it be installed in an existing bay?
Yes, if the bay meets the minimum dimensions. Rails can be shortened; where walls are not strong enough, the machine stands on a free-standing frame. We assess the bay and utilities on site.
Which pump is used?
The base unit has a CAT 3535 main pump; chemistry is applied by a dedicated solution pump.
How is the control system built?
Three nodes — pump, bay and bridge. Settings, packages and reports are available in the web interface.
Operation and service
Does the machine reset itself after a stop?
Yes. Once the bay is clear, the machine automatically resets for the next vehicle.
What if the arch meets an obstacle — a mirror, something at the front?
It works around the whole vehicle. If the arch hits an extended mirror or a front object, it reverses, backs away and retries until the obstacle clears or it reaches its backward limit.
How are pickups with an open bed detected?
The rear sensor compares the cab top with the bed. It is not a separate package and can be switched on or off in wash setup. A bed cover with a small height difference is treated as part of the vehicle.
Does the dryer stay on over an open-bed truck?
Configurable per machine: the centre dryer producers can be turned off while the side producers keep drying the sides of the box.
Is it certified for Europe?
Yes. LaserWash 360 Plus is CE certified and available worldwide.
Which countries do you serve?
Estonia, Latvia and Lithuania — supply, installation, training and service.
Technical answers based on PDQ: opwvws.com ↗ · PDF brochure ↗
Tell us about your site
Choose a topic — your e-mail opens with the subject and the questions we need.
Company details
- Company
- Baltic Carwash OÜ
- Registry code
- 12990433
- VAT number
- EE101853952
- Legal address
- Laki põik 2, Mustamäe linnaosa, 12915 Tallinn, Harju maakond, Estonia

